Hostaform® EC270TX
乙缩醛（POM）共聚物

Ticona

总体 
材料状态 • 已商用：当前有效
供货地区 • 欧洲
RoHS 合规性 • 联系制造商
加工方法 • 注射成型

物理性能 额定值 单位制 测试方法
密度 1.38g/cm³ ISO 1183
溶化体积流率（MVR） (190°C/2.16 kg) 1.50cm³/10min ISO 1133
机械性能 额定值 单位制 测试方法
拉伸模量 1950MPa ISO 527-2/1A/1
拉伸应力 (屈服) 44.0MPa ISO 527-2/1A/50
拉伸应变 (屈服) 11% ISO 527-2/1A/50
断张率 15% ISO 527-2/1A/50
冲击性能 额定值 单位制 测试方法
简支梁缺口冲击强度 (23°C) 6.5kJ/m² ISO 179/1eA
热性能 额定值 单位制 测试方法
熔融温度 2 166°C ISO 11357-3
电气性能 额定值 单位制 测试方法
表面电阻率 1.0E+3ohm IEC 60093
体积电阻率 1.0E+3ohm•cm IEC 60093
  
注射 额定值 单位制 
加工（熔体）温度 182 到 199°C 
模具温度 82.0 到 93.0°C 
注射说明  

Standard reciprocating screw injection molding machines with a high compression screw (minimum 3:1 and preferably 4:1) and low back pressure (0.35 Mpa/50 PSI) are favored. Using a low compression screw (I.E. general purpose 2:1 compression ratio) can result in unmelted particles and poor melt homogeneity. Using a high back pressure to make up for a low compression ratio may lead to excessive shear heating and deterioration of the Hostaform® material.

Melt Temperature: Preferred range 182-199 C (360-390 F). Melt temperature should never exceed 230 C (450 F).
Mold Surface Temperature: Preferred range 82-93 C (180-200 F) especially with wall thickness less than 1.5 mm (0.060 in.). May require mold temperature as high as 120 C (250 F) to reproduce mold surface or to assure minimal molded in stress. Wall thickness greater than 3mm (1/8 in.) may use a cooler (65 C/150 F) mold surface temperature and wall thickness over 6mm (1/4 in.) may use a cold mold surface down to 25 C (80 F). In general, mold surface temperatures lower than 82 C (180 F) may produce a hazy surface or a surface with flow lines, pits and other included defects.

备注
1 一般属性：这些不能被视为规格。

2 10°C/min